Silver and Copper Corrosion Bath
- Mã sản phẩm: 11400-7
- Nhà sản xuất: Stanhope-Seta
- Giá :
Liên hệ đặt hàng:
Silver and Copper Corrosion Bath
Part Number 11400-7
The Silver and Copper Corrosion Bath is a stainless steel water or oil bath digitally temperature controlled to ±0.1°C over a temperature range of ambient +5°C to 150°C.
Bio fuel compatibleFEATURES
- Ambient +5°C to 150°C temperature range
- 9 test stations
- Copper/Silver corrosion tests
METHODS
ASTM D130-IP 154, ASTM D4048, ASTM D4814, BIS IS 1448 Part 15, BS 2000 Parts 112 & 154, EN 2160, FTM 791 5325, IP 112, IP 227 (obs), IP PM-DJ 2005
DETAILS OF METHODS
|
BIS IS 1448 Part 15 |
Petroleum Products - Corrosiveness to Copper - Copper Strip Test |
|
ASTM D4048 |
Standard test method for detection of copper corrosion from lubricating grease |
|
ASTM D4814 |
General Specification for Automotive Spark Ignition Engine Fuels |
|
ASTM D130-IP 154 |
Standard test method for detection of copper corrosion from petroleum products by the copper strip tarnish test |
|
IP 227 (obs) |
Corrosiveness to Silver of Aviation Turbine Fuels |
|
FTM 791 5325 |
Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test |
|
IP 112 |
Determination of corrosiveness to copper of lubricating grease - Copper strip method |
|
BS 2000 Parts 112 & 154 |
Part 112: Determination of corrosiveness to copper of lubricating grease. Copper strip method. Part 154: Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test |
|
EN 2160 |
Oxidation. Corrosion |
|
IP PM-DJ 2005 |
Standard Specification for Automotive Spark-Ignition Engine Fuel |
ADDITIONAL INFORMATION
The bath has nine test stations, each with a lid and hook for suspending either a copper corrosion test vessel (11500-0) or a test tube support (11420-0). A test tube support can hold up to three test tubes (11590-0). Any combination of copper corrosion vessels and test tube supports may be used.
The top mounted thermostir unit incorporates over-temperature and low fluid level protection devices.
A Silver Corrosion Conversion Kit (11510-0) is available to convert six of the test stations to hold the glassware (11430-0) required for silver corrosion tests.
Supplied with: 9 lids, mains lead and instruction manual.
SPECIFICATIONS
|
Temperature range: |
Ambient +5°C to 150°C |
|
Temperature stability: |
±0.1°C |
|
Bath fluid |
Water or Oils |
|
Bath capacity: |
35 Litres |
|
Heater power: |
1500W |
|
Water Inlet Nozzle: |
10mm |
|
Overflow drain: |
10mm |
|
Voltage: |
110/120V, 60Hz or 220/240V, 50Hz |
|
Size (HxWxD): |
52 x 45 x 33cm |
|
Weight: |
10kg |
|
CCCN Code: |
Tariff 84198998 |
