Seta Ag-Cu Corrosion Bath
- Mã sản phẩm: 11300-2
- Nhà sản xuất: Stanhope-Seta
- Giá :
Liên hệ đặt hàng:
Seta Ag-Cu Corrosion Bath
Part Number 11300-2
Seta's Copper Corrosion Bath is a stainless steel water bath digitally temperature controlled to ±0.1°C over a temperature range of ambient +5°C to 120°C.

FEATURES
- Ambient +5°C to 120°C temperature range
- Copper/Silver corrosion tests
- 2 test stations
- Small footprint
METHODS
ASTM D130-IP 154, ASTM D4048, ASTM D4814, ASTM D4814-04b & IP PM-DJ 2005, ASTM D7671 Procedure A, BIS IS 1448 Part 15, BS 2000 Parts 112 & 154, EN 2160, FTM 791 5325, IP 112, IP 227 (obs), IP 611
ADDITIONAL INFORMATION
The bath has two test stations, each with a lid and hook for suspending either a copper corrosion test vessel (11500-0) or a test tube support (11420-0). A test tube support can hold up to three test tubes (11590-0). Any combination of copper corrosion vessels and test tube supports may be used.
The top mounted thermostir unit incorporates a low fluid level protection device.
Supplied with: 2 lids, mains lead and instruction manual.
SPECIFICATIONS
Temperature range |
Ambient +5°C to 120°C |
Temperature stability |
±0.1°C |
Bath fluid |
Water |
Bath capacity |
18 Litres |
Heater power |
1200W |
Water Inlet Nozzle |
10mm |
Overflow drain |
10mm |
Voltage |
110/120V, 50/60Hz or 220/240V, 50/60Hz |
Size (HxWxD) |
52 x 34 x 23cm |
Weight |
9kg |
CCCN Code: |
Tariff 84198998
|
DETAILS OF METHODS
BIS IS 1448 Part 15 |
Test Petroleum Products - Corrosiveness to Copper - Copper Strip |
ASTM D7671 Procedure A |
Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method |
IP 611 |
Corrosiveness to silver of automotive gasoline - Silver strip method |
ASTM D4048 |
Standard test method for detection of copper corrosion from lubricating grease |
ASTM D4814 |
General Specification for Automotive Spark Ignition Engine Fuels |
ASTM D130-IP 154 |
Standard test method for detection of copper corrosion from petroleum products by the copper strip tarnish test |
IP 227 (obs) |
Corrosiveness to Silver of Aviation Turbine Fuels |
FTM 791 5325 |
Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test |
IP 112 |
Determination of corrosiveness to copper of lubricating grease - Copper strip method |
BS 2000 Parts 112 & 154 |
Part 112: Determination of corrosiveness to copper of lubricating grease. Copper strip method. Part 154: Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test |
EN 2160 |
Oxidation. Corrosion |
ASTM D4814-04b & IP PM-DJ 2005 |
Standard Specification for Automotive Spark-Ignition Engine Fuel |