Seta Existent Gum Solid Block Bath
- Mã sản phẩm: 12200-3
- Nhà sản xuất: Stanhope-Seta
- Giá :
Liên hệ đặt hàng:
Seta Existent Gum Solid Block Bath
Part Number 12200-3
A Solid Block Bath designed to carry out up to five simultaneous tests for determining existent gum content in fuels by the Jet Evaporation method.
Calibration and verification equipment available
FEATURES
- 5 test stations
- Integral steam superheater
- Digital temperature control
- 140° to 260°C temperature range
- Flow gauge calibrated for air and steam
METHODS
ASTM D381-IP 131, BIS IS 1448 Part 29, BS 2000 Part 131, BS 4348 (obs), FTM 791 3302, IP 540, ISO 6246
ADDITIONAL INFORMATION
The unit comprises a solid block bath with integral steam superheater, removable taper-fit conical steam/air jet adaptors with copper screens, and a steam/air flow control valve and gauge. The bath has five test wells, and a thermometer well. Outlets can be individually checked for uniform flow of air or steam.
The bath has a temperature range of 140° to 260°C, and is controlled by a digital temperature controller which displays both the set temperature and the actual bath temperature measured by a probe. The flow of steam or air is adjusted by an inlet control valve and monitored on a Bourdon gauge calibrated for both air and steam.
SUPPLIED WITH: a Bourdon gauge type flow indicator, calibrated for both air and steam, five steam/air jet assemblies, five borosilicate glass beakers, and instruction manual. NOTE: Steam Generator or Rotary Compressor is required for operation.
SPECIFICATIONS
Operating Temp. Range |
140 to 260°C ±0.5°C |
Heaters |
2kW |
Over-temperature Cut-out |
280°C (adjustable) |
Air/Steam Inlet |
15mm o.d pipe |
Flow Indicator |
Calibrated for min and max air and steam flow |
Power |
2kW |
Voltage |
110/120V, 50/60Hz 220/240V, 50/60Hz |
Size (HxWxD) |
45 x 35 x 50cm |
Weight |
45kg |
CCCN Code: |
Tariff 90318098 |
DETAILS OF METHODS
BIS IS 1448 Part 29 |
Petroleum Products - Gum Content of Light and Middle Distillate Fuels - Jet Evaporation Method |
ASTM D381-IP 131 |
Standard test method for gum content in fuels by jet evaporation |
ISO 6246 |
Existent Gum in Fuels by Jet Evaporation |
BS 4348 (obs) |
Existent Gum in Fuels by Jet Evaporation |
BS 2000 Part 131 |
Existent Gum in Fuels by Jet Evaporation |
FTM 791 3302 |
Existent Gum in Fuels by Jet Evaporation |
IP 540 |
Existent Gum Content in fuels |